Shobhadoshi為每個需要通過Cisco的350-401題庫下載考試認證的考生提供了一個明確和卓越的解決方案，我們為你提供Cisco的350-401題庫下載考試詳細的問題及答案， 我們團隊的IT專家是最有經驗和資格的，我們的考試測試題及答案幾乎和真實得考試一樣，做到這樣的確很了不起，更重要的是我們Shobhadoshi網站在全球範圍內執行這項考試培訓通過率最大。 我們Shobhadoshi Cisco的350-401題庫下載考試學習指南可以成為你職業生涯中的燈塔，因為它包含了一切需要通過的350-401題庫下載考試，選擇我們Shobhadoshi，可以幫助你通過考試，這是個絕對明智的決定，因為它可以讓你從那些可怕的研究中走出來，Shobhadoshi就是你的幫手，你可以得到雙倍的結果，只需要付出一半的努力。 我們Shobhadoshi可以為你的IT認證保駕護航，是目前網路上最受歡迎的最可行的培訓資料網站，350-401題庫下載考試是你職業生涯中的一個里程碑，在這種競爭激烈的世界裏，它比以往任何時候都顯得比較重要，我們保證讓你一次輕鬆的通過考試，也讓你以後的工作及日常工作變得有滋有味。

對於 Cisco的350-401題庫下載考試認證每個考生都很迷茫。

我們Shobhadoshi的 Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)題庫下載的考題資料是按照相同的教學大綱來來研究的，同時也不斷升級我們的培訓材料，所以我們的考試培訓資料包括試題及答案，和實際的考試相似度非常高，所以形成了我們Shobhadoshi的通過率也是非常的高，這也是不可否認的事實， 由此知道Shobhadoshi Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)題庫下載考試培訓資料對考生的幫助，而且我們的價格絕對合理，適合每位IT認證的考生。 但是這並不代表不能獲得高分輕鬆通過考試。那麼，還不知道通過這個考試的捷徑在哪里的你，是不是想知道通過考試的技巧呢？現在我來告訴你，就是利用Shobhadoshi的350-401 權威認證考古題。

你現在正在為了尋找Cisco的350-401題庫下載認證考試的優秀的資料而苦惱嗎？不用再擔心了，這裏就有你最想要的東西。應大家的要求，Shobhadoshi為參加350-401題庫下載考試的考生專門研發出了一種高效率的學習方法。大家都是一邊工作一邊準備考試，這樣很費心費力吧？為了避免你在準備考試時浪費太多的時間，Shobhadoshi為你提供了只需要經過很短時間的學習就可以通過考試的350-401題庫下載考古題。

最近Cisco的Cisco 350-401題庫下載認證考試很受歡迎，想參加嗎？

選擇參加Cisco 350-401題庫下載 認證考試是一個明智的選擇，因為有了Cisco 350-401題庫下載認證證書後，你的工資和職位都會有所提升，生活水準就會相應的提供。但是通過Cisco 350-401題庫下載 認證考試不是很容易的，需要花很多時間和精力掌握好相關專業知識。Shobhadoshi是一個制訂Cisco 350-401題庫下載 認證考試培訓方案的專業IT培訓網站。你可以先在我們的網站上免費下載部分部分關於Cisco 350-401題庫下載 認證考試的練習題和答案作為免費嘗試，以便你可以檢驗我們的可靠性。一般，試用Shobhadoshi的產品後，你會對我們的產品很有信心的。

它可以避免你為考試浪費過多的時間和精力，助你輕鬆高效的通過考試。即便您沒有通過考試，我們也將承諾全額退款！所以你將沒有任何損失。

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

我們Shobhadoshi Cisco的IAPP AIGP考試的做法是最徹底的，以及最準確及時的最新的實踐檢驗，你會發現目前市場上的唯一可以有讓你第一次嘗試通過困難的信心。 能否成功通過一項想要的認證測試，在于你是否找對了方法，Cisco MikroTik MTCNA考古題就是你通過考試的最佳方法，讓考生輕松獲得認證。 什麼是Shobhadoshi Cisco的SAP C-FIORD-2502考試認證培訓資料？網上有很多網站提供Shobhadoshi Cisco的SAP C-FIORD-2502考試培訓資源，我們Shobhadoshi為你提供最實際的資料，我們Shobhadoshi專業的人才隊伍，認證專家，技術人員，以及全面的語言大師總是在研究最新的Cisco的SAP C-FIORD-2502考試，因此，真正相通過Cisco的SAP C-FIORD-2502考試認證，就請登錄Shobhadoshi網站，它會讓你靠近你成功的曙光，一步一步進入你的夢想天堂。 對于希望獲得Nutanix NCP-US認證的專業人士來說，我們考古題是復習并通過考試的可靠題庫，同時幫助準備參加認證考試考生獲得Nutanix NCP-US認證。 如果你擁有了Shobhadoshi Cisco的Huawei H29-111_V1.0考試培訓資料，我們將免費為你提供一年的更新，這意味著你總是得到最新的考試認證資料，只要考試目標有所變化，以及我們的學習材料有所變化，我們將在第一時間為你更新。

Updated: May 28, 2022