如果你正在為如何通過350-401學習指南考試而煩惱，這是沒有必要，通過最新的考試要點來提供覆蓋率很廣的Cisco 350-401學習指南擬真試題，幫助考生做好充足的考前準備。Shobhadoshi的目的在于如何提供可以確保考生通過認證的高品質題庫，我們的350-401學習指南考試練習題和答案準確性高，問題覆蓋面大，不斷的更新和整編出高通過率的Cisco 350-401學習指南題庫，這也是我們對所有的考生提供的保障。 選擇Shobhadoshi的產品幫助你的第一次參加的Cisco 350-401學習指南 認證考試是很划算的。Shobhadoshi有很好的的售後服務。 當你嘗試了我們提供的關於Cisco 350-401學習指南認證考試的部分考題及答案,你可以對我們Shobhadoshi做出選擇了，我們會100%為你提供方便以及保障。

CCNP Enterprise 350-401 你還在猶豫什麼，機不可失，失不再來。

CCNP Enterprise 350-401學習指南 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 為了明天的成功，選擇Shobhadoshi是正確的。 為了配合當前真正的考驗，從Shobhadoshi Cisco的350-401 最新考古題考試認證考試考古題的技術團隊的任何變化及時更新的問題和答案，我們也總是接受用戶回饋的問題，充分的利用了一些建議，從而達到完美的Shobhadoshi Cisco的350-401 最新考古題考試認證測試資料，使我們Shobhadoshi始終擁有最高的品質。

在如今競爭激烈的IT行業中，通過了Cisco 350-401學習指南 認證考試是有很多好處的。因為有了Cisco 350-401學習指南 認證證書就可以提高收入。拿到了Cisco 350-401學習指南 認證證書的人往往要比沒有證書的同行工資高很多。

Cisco 350-401學習指南 - 你绝对会相信我的话的。

有了目標就要勇敢的去實現。每一個選擇IT行業的人應該都不會只是安於現狀那樣簡單點的生活，現在各行各業的競爭壓力可想而知，IT行業也不例外，所以你們要是有了目標就要勇敢的去實現，其中通過 Cisco的350-401學習指南考試認證也是一次不小的競爭方式之一，通過了此考試，那麼你的IT生涯將會大展宏圖，會有一幅不一樣的藍圖等著你去勾勒，而我們Shobhadoshi網站可以提供你真實準確的培訓資料，幫助你通過考試獲得認證，從而實現你的藍圖理想。

這個考古題為你搜集並解析了很多優秀的過去考試考過的問題，並且根據最新的大綱加入了很多可能出現的新問題。这是一个可以保证你一次通过考试的考古題。

350-401 PDF DEMO:

QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

Huawei H20-713_V1.0 - 就好比我，平時不努力，老大徒傷悲。 CIPS L4M4 - Cisco的認證考試資格是很重要的資格，因此參加Cisco考試的人變得越來越多了。 GIAC GCSA - 因此，Shobhadoshi可以给大家提供更多的优秀的参考书，以满足大家的需要。 H3C GB0-713 - Shobhadoshi就是你最好的選擇。 CIDQ IDFX - 如果不相信就先試用一下。

Updated: May 28, 2022