隨著350-401考題免費下載考試的變化，Shobhadoshi已經跟新了考試問題和答案，包括一些新增的問題，通過使用更新版本的Cisco 350-401考題免費下載考古題，您可以輕松快速的通過考試，還節約寶貴的時間。獲得350-401考題免費下載認證之后，您的職業生涯也將開始新的輝煌時期。購買我們的Cisco 350-401考題免費下載題庫資料可以保證考生一次性通過考試，這是值得大家信賴的題庫網站，可以幫大家減少考試成本，節約時間，是上班族需要獲取350-401考題免費下載認證的最佳選擇。 Shobhadoshi的專家團隊針對Cisco 350-401考題免費下載 認證考試研究出了最新的短期有效培訓方案，為參加Cisco 350-401考題免費下載 認證考試的考生進行20個小時左右的培訓，他們就能快速掌握很多知識和鞏固自己原有的知識，還能輕鬆通過Cisco 350-401考題免費下載 認證考試，比那些花大量的時間和精力準備考試的人輕鬆得多。 你也會很快很順利的通過Cisco 350-401考題免費下載的認證考試。

CCNP Enterprise 350-401 這是某位獲得了認證的考生向我們說的心聲。

有很多網站提供資訊Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考題免費下載考試，為你提供 Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考題免費下載考試認證和其他的培訓資料，Shobhadoshi是唯一的網站，為你提供優質的Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考題免費下載考試認證資料，在Shobhadoshi指導和幫助下，你完全可以通過你的第一次Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考題免費下載考試，我們Shobhadoshi提供的試題及答案是由現代和充滿活力的資訊技術專家利用他們的豐富的知識和不斷積累的經驗，為你的未來在IT行業更上一層樓。 我們都清楚的知道，IT行業是個新型產業，它是帶動經濟發展的鏈條之一，所以它的地位也是舉足輕重不可忽視的。IT認證又是IT行業裏競爭的手段之一，通過了認證你的各方面將會得到很好的上升，但是想要通過並非易事，所以建議你利用一下培訓工具，如果要選擇通過這項認證的培訓資源，Shobhadoshi Cisco的350-401 考題套裝考試培訓資料當仁不讓，它的成功率高達100%，能夠保證你通過考試。

如今在IT業裏面臨著激烈的競爭，你會感到力不從心，這是必然的。你要做的是為你的事業保駕護航，當然，你有很多選擇，我推薦Shobhadoshi Cisco的350-401考題免費下載的考試試題及答案，它是幫助你成功獲得IT認證的好幫手，所以你還在等什麼呢，去獲得新的Shobhadoshi Cisco的350-401考題免費下載的考試培訓資料吧。

Shobhadoshi的Cisco 350-401考題免費下載資料的命中率高達100%。

Shobhadoshiの350-401考題免費下載考古題可以讓你輕鬆地準備考試。另外，如果你是第一次參加考試，那麼你可以使用軟體版的考古題。因為這是一個完全模擬真實考試的氛圍和形式的軟體。你可以提前感受到真實的考試。這樣你在真實的考試中就不會感到緊張。用過了軟體版的考古題，你就可以在參加考試時以一種放鬆的心態來做題，有利於你正常發揮你的水準。

在購買考古題之前，你可以去Shobhadoshi的網站瞭解更多的資訊，更好地瞭解這個網站。另外，關於考試失敗全額退款的政策，你也可以事先瞭解一下。

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

ATLASSIAN ACP-120 - 使用了Shobhadoshi的考古題，你在參加考試時完全可以應付自如，輕鬆地獲得高分。 你想在IT行業中大顯身手嗎，你想得到更專業的認可嗎？快來報名參加Huawei H20-721_V1.0資格認證考試進一步提高自己的技能吧。 成千上萬的IT考生通過我們的產品成功通過考試，該CompTIA XK0-005考古題的品質已被廣大考生檢驗。 一些通過IIA IIA-CIA-Part1-CN考試的考生成為了我們的回頭客，他們說選擇Shobhadoshi就意味著選擇成功。 成千上萬的IT考生通過使用我們的產品成功通過考試，Cisco PMI DAVSC考古題質量被廣大考試測試其是高品質的。

Updated: May 28, 2022