Shobhadoshi不僅可靠性強，而且服務也很好。如果你選擇了Shobhadoshi但是考試沒有成功，我們會100%全額退款給您。Shobhadoshi還會為你提供一年的免費更新服務。 我們Shobhadoshi也會是你通過Cisco 350-401考試重點認證考試最好的選擇，我們Shobhadoshi是你通過Cisco 350-401考試重點認證考試最好的保證。你選擇了我們Shobhadoshi，就等於選擇了成功。 Shobhadoshi可以為你免費提供24小時線上客戶服務，如果你沒有通過Cisco 350-401考試重點的認證考試，我們會全額退款給您。

CCNP Enterprise 350-401 Shobhadoshi的培訓課程有很高的品質。

Shobhadoshi提供的練習題是與真實的考試試題很相似的，能確保你一次成功通過Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考試重點 認證考試。 你可以現在就獲得Cisco的最新 350-401 考古題考試認證，我們Shobhadoshi有關於Cisco的最新 350-401 考古題考試的完整版本，你不需要到處尋找最新的Cisco的最新 350-401 考古題培訓材料，因為你已經找到了最好的Cisco的最新 350-401 考古題培訓材料，放心使用我們的試題及答案，你會完全準備通過Cisco的最新 350-401 考古題考試認證。

Cisco的350-401考試重點考試認證是當代眾多考試認證中最有價值的考試認證之一，在近幾十年裏，電腦科學教育已獲得了世界各地人們絕大多數的關注，它每天都是IT資訊技術領域的必要一部分，所以IT人士通過Cisco的350-401考試重點考試認證來提高自己的知識，然後在各個領域突破。而Shobhadoshi Cisco的350-401考試重點考試認證試題及答案正是他們所需要的，因為想要通過這項測試並不容易的，選擇適當的捷徑只是為了保證成功，Shobhadoshi正是為了你們的成功而存在的，選擇Shobhadoshi等於選擇成功，我們Shobhadoshi提供的試題及答案是Shobhadoshi的IT精英通過研究與實踐而得到的，擁有了超過計畫10年的IT認證經驗。

Cisco 350-401考試重點 - 通過了認證你在IT行業將體現國際價值。

當我們第一次開始提供Cisco的350-401考試重點考試的問題及答案和考試模擬器，我們做夢也沒有想到，我們將做出的聲譽，我們現在要做的是我們難以置信的擔保形式，Shobhadoshi的擔保，你會把你的Cisco的350-401考試重點考試用來嘗試我們Cisco的350-401考試重點培訓產品之一，這是正確的，合格率100%，我們能保證你的結果。

你是一名IT人員嗎？你報名參加當今最流行的IT認證考試了嗎？如果你是，我將告訴你一個好消息，你很幸運，我們Shobhadoshi Cisco的350-401考試重點考試認證培訓資料可以幫助你100%通過考試，這絕對是個真實的消息。如果你想在IT行業更上一層樓，選擇我們Shobhadoshi那就更對了，我們的培訓資料可以幫助你通過所有有關IT認證的，而且價格很便宜，我們賣的是適合，不要不相信，看到了你就知道。

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Microsoft AZ-800 - 我們Shobhadoshi網站在全球範圍內赫赫有名，因為它提供給IT行業的培訓資料適用性特別強，這是我們Shobhadoshi的IT專家經過很長一段時間努力研究出來的成果。 我的夢想的通過Cisco的Huawei H23-021_V1.0考試認證，我覺得有了這個認證，所有的問題都不是問題，不過想要通過這個認證是比較困難，不過不要緊，我選擇Shobhadoshi Cisco的Huawei H23-021_V1.0考試培訓資料，它可以幫助我實現我的夢想，如果也有IT夢，那就趕緊把它變成現實吧，選擇Shobhadoshi Cisco的Huawei H23-021_V1.0考試培訓資料，絕對信得過。 Cisco 100-140 - 古人曾說：故天將大任於斯人也，必先苦其心志，勞其筋骨，餓其體膚，空乏其身。 我們Shobhadoshi是一個優秀的IT認證資訊來源，在Shobhadoshi裏，你可以找到為你認證考試的學習技巧以及學習材料，我們Shobhadoshi Cisco的Huawei H12-821_V1.0考試培訓資料是由經驗豐富和擁有長期學生經驗和他們的要求的IT專業人士研究出來的培訓資料，內容精確性和邏輯性特別強，遇到Shobhadoshi，你將遇到最好的培訓資料，放心使用我們的Shobhadoshi Cisco的Huawei H12-821_V1.0考試培訓資料，有了它你就已經做好了充分的準備來迎接這個認證考試。 Shobhadoshi是一家專業的網站，它給每位元考生提供優質的服務，包括售前服務和售後服務兩種，如果你需要我們Shobhadoshi Cisco的Microsoft SC-400考試培訓資料，你可以先使用我們的免費試用的部分考題及答案，看看適不適合你，這樣你可以親自檢查了我們Shobhadoshi Cisco的Microsoft SC-400考試培訓資料的品質，再決定購買使用。

Updated: May 28, 2022