當然，這也並不是說你就完全不用努力了。你需要做的就是，認真學習這個資料裏出現的所有問題。只有這樣，在考試的時候你才可以輕鬆應對。 用過了軟體版的考古題，你就可以在參加考試時以一種放鬆的心態來做題，有利於你正常發揮你的水準。Shobhadoshiの350-401證照資訊考古題可以讓你輕鬆地準備考試。 Shobhadoshi绝对是一个全面保障你的利益，设身处地为你考虑的网站。

Shobhadoshi的350-401證照資訊考古題是很好的參考資料。

Shobhadoshi Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)證照資訊考試認證培訓資料是幫助每個IT人士實現自己人生宏偉目標的最好的方式方法，它包括了試題及答案，並且和真實的考試題目不相上下，真的是所謂稱得上是最好的別無二選的培訓資料。 Shobhadoshi網站在通過350-401 考題資源資格認證考試的考生中有著良好的口碑。這是大家都能看得到的事實。

Cisco的350-401證照資訊考試認證將會從遙不可及變得綽手可得。這是為什麼呢，因為有Shobhadoshi Cisco的350-401證照資訊考試培訓資料在手，Shobhadoshi Cisco的350-401證照資訊考試培訓資料是IT認證最好的培訓資料，它以最全最新，通過率最高而聞名，而且省時又省力，有了它，你將輕鬆的通過考試。實現了你的夢想，你就有了自信，有了自信你將走向成功。

Cisco 350-401證照資訊 - 它可以讓你得到事半功倍的結果。

如果你想選擇通過 Cisco 350-401證照資訊 認證考試來使自己在如今競爭激烈的IT行業中地位更穩固，讓自己的IT職業能力變得更強大，你必須得具有很強的專業知識。而且通過 Cisco 350-401證照資訊 認證考試也不是很簡單的。或許通過Cisco 350-401證照資訊認證考試是你向IT行業推廣自己的一個敲門磚，但是不一定需要花費大量的時間和精力來復習相關知識，你可以選擇用我們的 Shobhadoshi的產品，是專門針對IT認證考試相關的培訓工具。

Shobhadoshi是一個你可以完全相信的網站。Shobhadoshi的IT技術專家為了讓大家可以學到更加高效率的資料一直致力於各種IT認證考試的研究，從而開發出了更多的考試資料。

350-401 PDF DEMO:

QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

我們的Shobhadoshi不僅能給你一個好的考試準備，讓你順利通過Cisco VMware 3V0-21.23 認證考試，而且還會為你提供免費的一年更新服務。 ISTQB CTAL-TM - 那麼，為了通過這個考試你是怎麼進行準備的呢？是死命地學習與考試相關的知識呢，還是使用了高效率的學習資料呢？ 因此Cisco ISACA COBIT-2019 認證考試也是一項很受歡迎的IT認證考試。 相對于考生尋找工作而言，一張Nutanix NCP-CN認證可以倍受企業青睞，為您帶來更好的工作機會。 VMware 250-602 - 在你使用之後，相信你會很滿意我們的產品的。

Updated: May 28, 2022