We will provide you with professional advice before you buy our 350-401 Questions guide materials. If you have problems in the process of using our 350-401 Questions study questions, as long as you contact us anytime and anywhere, we will provide you with remote assistance until that all the problems on our 350-401 Questions exam braindumps are solved. When you send us a message, we will reply immediately and we will never waste your precious time on studying our 350-401 Questions practice quiz. Are you trying to pass the 350-401 Questions exam to get the longing 350-401 Questions certification? As we know, there are a lot of the advantages of the certification, such as higher salaries, better job positions and so on. Perhaps at this moment, you need the help of our 350-401 Questions study materials. Also, the system will deduct the relevant money.

CCNP Enterprise 350-401 Please pay more attention to our website.

CCNP Enterprise 350-401 Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) As a responsible company over ten years, we are trustworthy. After you use, you will know that it is really good. The site of Shobhadoshi is well-known on a global scale.

The world today is in an era dominated by knowledge. Knowledge is the most precious asset of a person. If you feel exam is a headache, don't worry.

Cisco 350-401 Questions - 100% guarantee to pass IT certification test.

The disparity between our 350-401 Questions practice materials and others are distinct. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our 350-401 Questions real exam are devised and written base on the real exam. Do not let other 350-401 Questions study dumps mess up your performance or aggravate learning difficulties. The efficiency and accuracy of our 350-401 Questions learning guide will not let you down.

If you don't want to waste a lot of time and efforts on the exam, you had better select Shobhadoshi Cisco 350-401 Questions dumps. Using this certification training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

350-401 PDF DEMO:

QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B

QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html

QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Remember that each CIPS L4M6 exam preparation is built from a common certification foundation.CIPS L4M6 prepareation will provide the most excellent and simple method to pass your CIPS L4M6 Certification Exams on the first attempt. As long as you choose our dumps as review tool before the exam, you will have a happy result in SAP C_TS410_2504 exam, which is perfectly obvious. The Microsoft DP-700 preparation products available here are provided in line with latest changes and updates in Microsoft DP-700 syllabus. Actually, Huawei H12-821_V1.0 exam really make you anxious. After our unremitting efforts, VMware 250-610 learning guide comes in everybody's expectation.

Updated: May 28, 2022