If you don't believe, you can give it a try. The passing rate is the best test for quality of our 350-401 Practice Exam Online study materials. And we can be very proud to tell you that the passing rate of our 350-401 Practice Exam Online Exam Questions is almost 100%. We introduce a free trial version of the 350-401 Practice Exam Online learning guide because we want users to see our sincerity. 350-401 Practice Exam Online exam prep sincerely hopes that you can achieve your goals and realize your dreams. We always strictly claim for our 350-401 Practice Exam Online study materials must be the latest version, to keep our study materials up to date, we constantly review and revise them to be at par with the latest Cisco syllabus for 350-401 Practice Exam Online exam.

Come and buy our 350-401 Practice Exam Online exam guide!

If you are forced to pass exams and obtain certification by your manger, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice Exam Online original questions will be a good choice for you. Up to now, many people have successfully passed the Valid 350-401 Guide Files exam with our assistance. So you need to be brave enough to have a try.

Most IT workers prefer to choose our online test engine for their 350-401 Practice Exam Online exam prep because online version is more flexible and convenient. With the help of our online version, you can not only practice our 350-401 Practice Exam Online exam pdf in any electronic equipment, but also make you feel the atmosphere of 350-401 Practice Exam Online actual test. The exam simulation will mark your mistakes and help you play well in 350-401 Practice Exam Online practice test.

Cisco 350-401 Practice Exam Online - We provide tracking services to all customers.

Our 350-401 Practice Exam Online practice dumps enjoy popularity throughout the world. So with outstanding reputation, many exam candidates have a detailed intervention with our staff before and made a plea for help. We totally understand your mood to achieve success at least the 350-401 Practice Exam Online exam questions right now, so our team makes progress ceaselessly in this area to make better 350-401 Practice Exam Online study guide for you. We supply both goods which are our 350-401 Practice Exam Online practice materials as well as high quality services.

But the country's demand for high-end IT staff is still expanding, internationally as well. So many people want to pass Cisco 350-401 Practice Exam Online certification exam.

350-401 PDF DEMO:

QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

Our RedHat EX374 free demo provides you with the free renewal in one year so that you can keep track of the latest points happening. UiPath UiPath-ABAv1 - We can help you to achieve your goals. We can lead you the best and the fastest way to reach for the certification of Cisco 100-140-KR exam dumps and achieve your desired higher salary by getting a more important position in the company. Salesforce Field-Service-Consultant - If you have a faith, then go to defend it. They are willing to solve the problems of our CompTIA XK0-005 training guide 24/7 all the time.

Updated: May 28, 2022