Sie können jederzeit Abonnmentszeit verlängern, so dass Sie mehr Zeit haben, sich auf die Prüfung vorzubereiten. Die Fragen zur Cisco 350-401 Tests Zertifizierungsprüfung werden nach dem Lehrkompendium und den echten Prüfungen bearbeitet. Wir aktualisieren auch ständig unsere Schulungsunterlagen, so dass Sie in erster Zeit die neuesten und besten Informationen bekommen. Die Schulungsunterlagen zur Cisco 350-401 Tests-Prüfung von Shobhadoshi sind sehr gut. Mit Ihr können Sie Ihren Erfolg ganz leicht erzielen. Und ich empfehle Ihnen die Fragen und Antworten zur 350-401 Tests Zertifizierungsprüfung von Shobhadoshi.

CCNP Enterprise 350-401 Shobhadoshi sagen mit den Beweisen.

Wir versprechen, dass Sie nur einmal die Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Tests Zertifizierungsprüfung mit einer hohen Note bestehen können. Die den Schulungsunterlagen zur Cisco 350-401 Deutsch Zertifizierungsprüfung von Shobhadoshi sind eine von der Praxis bewährte Software. Mit ihr können Sie eine bessere Theorie bekommen.

350-401 Tests-Prüfung erfordert ein hohes Maß an Fachwissen der IT. Wenn es Ihnen dieses Wissen fehlt, kann Shobhadoshi Ihnen die Kenntnissequellen zur Verfügung stehen. Mit ihren reichen Fachkenntnissen und Erfahrungen bietet der Expertenteam die relevanten Fragen und Antworten der 350-401 Tests Zertifizierungsprüfung.

Cisco 350-401 Tests - Teil der Testdaten im Internet ist kostenlos.

Die Cisco 350-401 Tests Zertifizierungsprüfung ist heutztage sehr beliebt. Shobhadoshi wird Ihnen helfen, die Prüfung zu bestehen, und bietet Ihnen einen einjährigen kostenlosen Update-Service. Dann wählen Sie doch Shobhadoshi, um Ihren Traum zu erfüllen. Um Erfolg zu erringen, ist Ihnen weise, Shobhadoshi zu wählen. Wählen Sie Shobhadoshi, Sie werden der nächste IT-Elite sein.

Die Schulungsunterlagen zur Cisco 350-401 Tests Zertifizierungsprüfung von Shobhadoshi werden Ihren Traum erfüllen. Wir werden mit Ihnen durch dick und dünn gehen und die Herausforderung mit Ihnen zusammen nehmen.

350-401 PDF DEMO:

QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

Menschen, die Cisco Huawei H20-696_V2.0-Zertifikat erhalten, haben oft viel höheres Gehalt als Kollegen ohne Cisco Huawei H20-696_V2.0-Zertifikat Jedoch ist es nicht sehr einfach, die Cisco Huawei H20-696_V2.0 Zertifizierungsprüfung zu bestehen. Google Associate-Cloud-Engineer - Sie sind auch die beste Abkürzung zum Erfolg. Wenn Sie den Schulungsplan von Shobhadoshi kaufen, versprechen wir Ihnen, dass Sie 100% die Cisco ACAMS CAMS Zertifizierungsprüfung bestehen können. Microsoft MS-700-Deutsch - Die Erfolgsquote von Shobhadoshi ist unglaublich hoch. Microsoft AZ-204-KR - Die IT-Prüfung und die Zertifizierung sind heutztage immer wichtiger geworden als je zuvor in der konkurrenzfähigen Welt.

Updated: May 28, 2022