350-401考試資料介紹

取得了這個考試的認證資格,你就可以獲得很多的利益。如果你也想參加這個考試的話,Shobhadoshi的350-401考試資料考古題是你準備考試的時候不能缺少的工具。因为这是350-401考試資料考试的最优秀的参考资料。 在Shobhadoshi你可以找到最適合你的培訓方式來輕鬆通過考試。無論你選擇哪種培訓方式,Shobhadoshi都為你提供一年的免費更新服務。 體驗過之後再購買,這樣可以避免你因為不知道資料的品質而盲目購買以後覺得後悔這樣的事情。

CCNP Enterprise 350-401 所以Shobhadoshi是個值得你們信賴的網站。

本站提供PDF版本和軟件本版的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考試資料題庫,PDF版本的方便打印,而對于軟件版本的Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考試資料題庫可以模擬真實的考試環境,方便考生選擇。 Shobhadoshi已經獲得了很多認證行業的聲譽,因為我們有很多的Cisco的350-401 認證考試考古題,350-401 認證考試學習指南,350-401 認證考試考古題,350-401 認證考試考題答案,目前在網站上作為最專業的IT認證測試供應商,我們提供完善的售後服務,我們給所有的客戶買的跟蹤服務,在你購買的一年,享受免費的升級試題服務,如果在這期間,認證測試中心Cisco的350-401 認證考試試題顯示修改或者別的,我們會提供免費為客戶保護,顯示Cisco的350-401 認證考試考試認證是由我們Shobhadoshi的IT產品專家精心打造,有了Shobhadoshi的Cisco的350-401 認證考試考試資料,相信你的明天會更好。

Shobhadoshi研究的材料可以保證你100%通過考試。有了Shobhadoshi你的職業生涯將有所改變,你可以順利地在IT行業中推廣自己。當你選擇了Shobhadoshi你就會真正知道你已經為通過Cisco 350-401考試資料認證考試做好了準備。

Cisco 350-401考試資料 - Shobhadoshi提供的練習題幾乎真題是一樣的。

我們Shobhadoshi Cisco的350-401考試資料考試培訓資料使你在購買得時候無風險,在購買之前,你可以進入Shobhadoshi網站下載免費的部分考題及答案作為試用,你可以看到考題的品質以及我們Shobhadoshi網站介面的友好,我們還提供一年的免費更新,如果沒有通過,我們將退還全部購買費用,我們絕對保障消費者的權益,我們Shobhadoshi提供的培訓資料實用性很強,絕對適合你,並且能達到不一樣的效果,讓你有意外的收穫。

我們是可以100%幫你通過考試的,你可以先在網上下載我們提供的部分考題Shobhadoshi免費嘗試。我們不但能保證你通過考試,還會為你提供一年的免費更新服務,如果不小心考試沒有成功,我們將會全額退款給你。

350-401 PDF DEMO:

QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html

QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

Microsoft MS-700-KR - 言與行的距離到底有多遠?關鍵看人心,倘使心神明淨,意志堅強,則近在咫尺,垂手可及 。 Shobhadoshi是個能幫你快速通過Cisco HP HP2-I78 認證考試的網站。 Python Institute PCET-30-01 - 優秀的資料不是只靠說出來的,更要經受得住大家的考驗。 Shobhadoshi在IT培訓行業中也是一個駐足輕重的網站,很多已經通過Cisco Amazon SOA-C02-KR 認證考試的IT人員都是使用了Shobhadoshi的幫助才通過考試的。 Microsoft AZ-305 - 與別的考試資料相比,這個考古題更能準確地劃出考試試題的範圍。

Updated: May 28, 2022

350-401考試資料 & Cisco Implementing Cisco Enterprise Network Core Technologies 350-401 Encor考古题推薦

PDF電子檔

考試編碼:350-401
考試名稱:Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
更新時間:2025-06-10
問題數量:335題
Cisco 350-401 考題資源

  下載免費試用


 

軟體引擎

考試編碼:350-401
考試名稱:Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
更新時間:2025-06-10
問題數量:335題
Cisco 350-401 考試備考經驗

  下載免費試用


 

在線測試引擎

考試編碼:350-401
考試名稱:Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
更新時間:2025-06-10
問題數量:335題
Cisco 350-401 最新考題

  下載免費試用


 

350-401 測試引擎

 | Shobhadoshi braindumps | Shobhadoshi real | Shobhadoshi topic | Shobhadoshi study | Shobhadoshi question sitemap