If you need software versions please do not hesitate to obtain a copy from our customer service staff. If you use the Shobhadoshi Cisco 350-401 Cuttin G Edge Resources study materials, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. With our 350-401 Cuttin G Edge Resources learning materials, you can spend less time but learn more knowledge than others. 350-401 Cuttin G Edge Resources exam questions will help you reach the peak of your career. Only Shobhadoshi can guarantee you 100% success.

CCNP Enterprise 350-401 So, hurry to take action.

So you totally can control the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Cuttin G Edge Resources study materials flexibly. Many times getting a right method is important and more efficient than spending too much time and money in vain. Our Shobhadoshi team devote themselves to studying the best methods to help you pass 350-401 Valid Braindumps Free Download exam certification.

Now let's take a look at why a worthy product of your choice is our 350-401 Cuttin G Edge Resources actual exam. Firstly, with a high pass rate of 98% to 100%, you will get the pass guarantee form our 350-401 Cuttin G Edge Resources practice engine. Secondly, the price of our 350-401 Cuttin G Edge Resources learning guide is quite favourable than the other websites'.

Cisco 350-401 Cuttin G Edge Resources - Select the materials is to choose what you want.

Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry. But the thing is not so easy for them they need many efforts to achieve their goals. Passing the test 350-401 Cuttin G Edge Resources certification can make them become that kind of people and if you are one of them buying our 350-401 Cuttin G Edge Resources study materials will help you pass the 350-401 Cuttin G Edge Resources test smoothly with few efforts needed.

It was a Xi'an coach byword that if you give up, the game is over at the same time. The game likes this, so is the exam.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

Absorbing the lessons of the Salesforce MuleSoft-Integration-Associate test prep, will be all kinds of qualification examination classify layout, at the same time on the front page of the Salesforce MuleSoft-Integration-Associate test materials have clear test module classification, so clear page design greatly convenient for the users, can let users in a very short period of time to find what they want to study, and then targeted to study. Amazon CLF-C02 - Or you can choose to free update your exam dumps. Microsoft SC-401 - Being considered the most authentic brand in this career, our professional experts are making unremitting efforts to provide our customers the latest and valid {CertName} exam simulation. You will find some exam techniques about how to pass ISACA COBIT-Design-and-Implementation exam from the exam materials and question-answer analysis provided by our Shobhadoshi. But we can help all of these candidates on SAP C_HRHFC_2411 study questions.

Updated: May 28, 2022