In the meantime, all your legal rights will be guaranteed after buying our 350-401 Latest Learning Material study materials. For many years, we have always put our customers in top priority. Not only we offer the best 350-401 Latest Learning Material training prep, but also our sincere and considerate attitude is praised by numerous of our customers. So we never stop the pace of offering the best services and 350-401 Latest Learning Material practice materials for you. Tens of thousands of candidates have fostered learning abilities by using our 350-401 Latest Learning Material Learning materials you can be one of them definitely. Even the 350-401 Latest Learning Material test syllabus is changing every year; our experts still have the ability to master the tendency of the important knowledge as they have been doing research in this career for years.

CCNP Enterprise 350-401 Life needs to be colorful and meaningful.

You do not need to spend money; because our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Learning Material test questions provide you with the demo for free. As is known to us, it must be of great importance for you to keep pace with the times. If you have difficulty in gaining the latest information when you are preparing for the Reliable Study Guide 350-401 Book, it will be not easy for you to pass the exam and get the related certification in a short time.

The most notable feature of our 350-401 Latest Learning Material learning quiz is that they provide you with the most practical solutions to help you learn the exam points of effortlessly and easily, then mastering the core information of the certification course outline. Their quality of our 350-401 Latest Learning Material study guide is much higher than the quality of any other materials, and questions and answers of 350-401 Latest Learning Material training materials contain information from the best available sources.

Cisco 350-401 Latest Learning Material - It will be a first step to achieve your dreams.

There may be a lot of people feel that the preparation process for 350-401 Latest Learning Material exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our 350-401 Latest Learning Material exam materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our 350-401 Latest Learning Material study guide prepared for you.

So there is nothing to worry about, just buy our 350-401 Latest Learning Material exam questions. It is our consistent aim to serve our customers wholeheartedly.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

ISC CISSP-KR - Our target is to reduce your pressure and improve your learning efficiency from preparing exam. If you buy our ISC CISSP exam questions, then you will find that Our ISC CISSP actual exam has covered all the knowledge that must be mastered in the exam. And our Salesforce PDII training questions are popular in the market. So, please give the Juniper JN0-253 study materials a chance to help you. Salesforce Sharing-and-Visibility-Architect - The three versions are very flexible for all customers to operate.

Updated: May 28, 2022