And we have three different versions Of our 350-401 Test Book study guide: the PDF, the Software and the APP online. If you are not sure whether our 350-401 Test Book exam braindumps are suitable for you, you can request to use our trial version. Of course, 350-401 Test Book learning materials produced several versions of the product to meet the requirements of different users. Every question from our 350-401 Test Book study materials is carefully elaborated and the content of our 350-401 Test Book exam questions involves the professional qualification certificate examination. We believe under the assistance of our 350-401 Test Book practice quiz, passing the exam and obtain related certificate are not out of reach. Study our 350-401 Test Book training materials to write "test data" is the most suitable for your choice, after recent years show that the effect of our 350-401 Test Book guide dump has become a secret weapon of the examinee through qualification examination, a lot of the users of our 350-401 Test Book guide dump can get unexpected results in the examination.

350-401 Test Book actual test guide is your best choice.

CCNP Enterprise 350-401 Test Book - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) That is because our company beholds customer-oriented tenets that guide our everyday work. Success does not come only from the future, but it continues to accumulate from the moment you decide to do it. At the moment you choose 350-401 Latest Dumps Questions practice quiz, you have already taken the first step to success.

The best way for them to solve the problem is to get the 350-401 Test Book certification. Because the certification is the main symbol of their working ability, if they can own the 350-401 Test Book certification, they will gain a competitive advantage when they are looking for a job. An increasing number of people have become aware of that it is very important for us to gain the 350-401 Test Book exam questions in a short time.

Cisco 350-401 Test Book - The reality is often cruel.

We attract customers by our fabulous 350-401 Test Book certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 Test Book test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool compiled by our company are definitely the best choice for you.

Imagine, if you're using a 350-401 Test Book practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the 350-401 Test Book test material can avoid these risks very well.

350-401 PDF DEMO:

QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

All in all, high efficiency of VMware 250-602 exam material is the reason for your selection. HP HPE2-B07 - They provide comprehensive explanation and integral details of the answers and questions. To help you get to know the exam questions and knowledge of the Huawei H20-813_V1.0 practice exam successfully and smoothly, our experts just pick up the necessary and essential content in to our Huawei H20-813_V1.0 test guide with unequivocal content rather than trivia knowledge that exam do not test at all. Amazon MLS-C01 - You will find that learning is becoming interesting and easy. Many exam candidates ascribe their success to our IBM C1000-197 real questions and become our regular customers eventually.

Updated: May 28, 2022