So you could understand the quality of our 350-401 Test Blueprint certification file. Before the clients decide to buy our 350-401 Test Blueprint test guide they can firstly be familiar with our products. The clients can understand the detailed information about our products by visiting the pages of our products on our company’s website. We Promise we will very happy to answer your question on our 350-401 Test Blueprint exam braindumps with more patience and enthusiasm and try our utmost to help you out of some troubles. So don’t hesitate to buy our {Examcode} study materials, we will give you the high-quality product and professional customer services. The key point is that you are serious on our 350-401 Test Blueprint exam questions and not just kidding.

Our 350-401 Test Blueprint exam torrent carries no viruses.

Of course, 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Blueprint learning materials produced several versions of the product to meet the requirements of different users. As long as you study our Reliable Exam 350-401 Study Guide training engine and followe it step by step, we believe you will achieve your dream easily. Every question from our Reliable Exam 350-401 Study Guide study materials is carefully elaborated and the content of our Reliable Exam 350-401 Study Guide exam questions involves the professional qualification certificate examination.

350-401 Test Blueprint training materials are not only the domestic market, but also the international high-end market. We are studying some learning models suitable for high-end users. Our research materials have many advantages.

Cisco 350-401 Test Blueprint - More useful certifications mean more ways out.

We attract customers by our fabulous 350-401 Test Blueprint certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 Test Blueprint test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool compiled by our company are definitely the best choice for you.

A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable. The 350-401 Test Blueprint test material is professional editorial team, each test product layout and content of proofreading are conducted by experienced professionals who have many years of rich teaching experiences, so by the editor of fine typesetting and strict check, the latest 350-401 Test Blueprint exam torrent is presented to each user's page is refreshing, but also ensures the accuracy of all kinds of learning materials is extremely high.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

So we take this factor into consideration, develop the most efficient way for you to prepare for the Splunk SPLK-1002 exam, that is the real questions and answers practice mode, firstly, it simulates the real Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test environment perfectly, which offers greatly help to our customers. Fortinet FCP_ZCS_AD-7.4 - They provide comprehensive explanation and integral details of the answers and questions. IAPP AIGP - And on your way to success, they can offer titanic help to make your review more relaxing and effective. We strongly advise you to buy our online engine and windows software of the Salesforce Service-Cloud-Consultant study materials, which can simulate the real test environment. The successful outcomes are appreciable after you getting our Huawei H20-699_V2.0 exam prep.

Updated: May 28, 2022