They are the versions of the PDF, Software and APP online. You can choose the one which is your best suit of our 350-401 Study Material study materials according to your study habits. Our 350-401 Study Material exam materials have plenty of advantages. And our software of the 350-401 Study Material training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. We strongly advise you to have a brave attempt.

CCNP Enterprise 350-401 It is time for you to plan your life carefully.

We will send our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Material exam question in 5-10 minutes after their payment. In order to survive in the society and realize our own values, learning our Reliable 350-401 Exam Braindumps practice engine is the best way. Never top improving yourself.

Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate. What the certificate main? All kinds of the test 350-401 Study Material certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the 350-401 Study Material exam guide, because get the test 350-401 Study Material certification is not an easy thing, so, a lot of people are looking for an efficient learning method. And here, fortunately, you have found the 350-401 Study Material exam braindumps, a learning platform that can bring you unexpected experiences.

Cisco 350-401 Study Material - You may try it!

Everyone has a utopian dream in own heart. Dreams of imaginary make people feel disheartened. In fact, as long as you take the right approach, everything is possible. You can pass the Cisco 350-401 Study Material exam easily. Why? Because you have Shobhadoshi's Cisco 350-401 Study Material exam training materials. Shobhadoshi's Cisco 350-401 Study Material exam training materials are the best training materials for IT certification. It is famous for the most comprehensive and updated by the highest rate. It also can save time and effort. With it, you will pass the exam easily. If you pass the exam, you will have the self-confidence, with the confidence you will succeed.

Our product is of high quality and the passing rate and the hit rate are both high. Nowadays the requirements for jobs are higher than any time in the past.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

Even if you spend a small amount of time to prepare for ISTQB CT-AI certification, you can also pass the exam successfully with the help of Shobhadoshi Cisco ISTQB CT-AI braindump. We treat it as our major responsibility to offer help so our Microsoft SC-401 practice guide can provide so much help, the most typical one is their efficiency. Cisco CIPS L4M5 certification exam is a very difficult test. EMC D-NWR-DY-01 - So sales and customer satisfaction improved dramatically. Once you purchased our Microsoft DP-700 exam dump, we will try our best to help you pass Microsoft DP-700 exam.

Updated: May 28, 2022