By imparting the knowledge of the 350-401 Exam Training exam to those ardent exam candidates who are eager to succeed like you, they treat it as responsibility to offer help. So please prepare to get striking progress if you can get our 350-401 Exam Training study guide with following steps for your information. With our 350-401 Exam Training learning materials for 20 to 30 hours, we can claim that you will be confident to go to write your 350-401 Exam Training exam and pass it. The 350-401 Exam Training exam questions are so scientific and reasonable that you can easily remember everything. Every day we are learning new knowledge, but also constantly forgotten knowledge before, can say that we have been in a process of memory and forger, but how to make our knowledge for a long time high quality stored in our minds? This requires a good memory approach, and the 350-401 Exam Training study braindumps do it well. If you want to find the best 350-401 Exam Training study materials, the first thing you need to do is to find a bank of questions that suits you.

CCNP Enterprise 350-401 How diligent they are!

Come to study our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Training learning materials. Once it is time to submit your exercises, the system of the Online 350-401 Bootcamps preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.

Now, you are fortunate enough to come across our 350-401 Exam Training exam guide. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well. Our 350-401 Exam Training exam materials are famous among candidates.

Cisco 350-401 Exam Training - Selecting Shobhadoshi means choosing a success

350-401 Exam Training exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite 350-401 Exam Training exam prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.

You can free download part of Shobhadoshi's practice questions and answers about Cisco certification 350-401 Exam Training exam online, as an attempt to test our quality. As long as you choose to purchase Shobhadoshi's products, we will do our best to help you pass Cisco certification 350-401 Exam Training exam disposably.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our Amazon DVA-C02-KR training materials. Shobhadoshi's training product for Cisco certification Huawei H19-639_V1.0 exam includes simulation test and the current examination. With the help of our Microsoft DP-420 practice guide, you don't have to search all kinds of data, because our products are enough to meet your needs. Using our exclusive online Cisco CompTIA PK0-005 exam questions and answers, will become very easy to pass the exam. Huawei H19-483_V1.0 - Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products.

Updated: May 28, 2022