Many people who have passed some IT related certification exams used our Shobhadoshi's training tool. Our Shobhadoshi expert team use their experience for many people participating in Cisco certification 350-401 Exam Sims exam to develope the latest effective training tools, which includes Cisco 350-401 Exam Sims certification simulation test, the current exam and answers. Our Shobhadoshi's test questions and answers have 95% similarity with the real exam. If you attend Cisco certification 350-401 Exam Sims exams, your choosing Shobhadoshi is to choose success! I wish you good luck. Shobhadoshi website is fully equipped with resources and the questions of Cisco 350-401 Exam Sims exam, it also includes the Cisco 350-401 Exam Sims exam practice test.

CCNP Enterprise 350-401 Come on, you will be the next best IT experts.

CCNP Enterprise 350-401 Exam Sims - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) It is also the dream of ambitious IT professionals. If you won't believe us, you can visit our Shobhadoshi to experience it. And then, I am sure you must choose Shobhadoshi exam dumps.

You will encounter the complex questions in the exam, but Shobhadoshi can help you to pass the exam easily. Shobhadoshi's Cisco 350-401 Exam Sims exam training material includes all the knowledge that must be mastered for the purpose of passing the Cisco 350-401 Exam Sims exam. Shobhadoshi's Cisco 350-401 Exam Sims exam training materials are bring the greatest success rate to all the candicates who want to pass the exam.

Cisco 350-401 Exam Sims - Miss the opportunity, you will regret it.

Shobhadoshi is a reliable study center providing you the valid and correct 350-401 Exam Sims questions & answers for boosting up your success in the actual test. 350-401 Exam Sims PDF file is the common version which many candidates often choose. If you are tired with the screen for study, you can print the 350-401 Exam Sims pdf dumps into papers. With the pdf papers, you can write and make notes as you like, which is very convenient for memory. We can ensure you pass with Cisco study torrent at first time.

Moreover, the colleagues and the friends with IT certificate have been growing. In this case, if you have none, you will not be able to catch up with the others.

350-401 PDF DEMO:

QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

Microsoft MB-820 - Besides, we will offer you the benefits of 365 days free update. If you have any questions about purchasing ISACA CISM exam software, you can contact with our online support who will give you 24h online service. Passing real exam is not easy task so many people need to take professional suggestions to prepare Nutanix NCP-US practice exam. Maybe you have heard that the important UiPath UiPath-TAEPv1 exam will take more time or training fee, because you haven't use our UiPath UiPath-TAEPv1 exam software provided by our Shobhadoshi. Are you still silly to spend much time to prepare for your test but still fail again and again? Do you find that some candidates pass exam easily with Cisco SAP C-HRHFC-2411 exam dumps questions? If your goal is passing exams and obtain certifications our SAP C-HRHFC-2411 exam dumps can help you achieve your goal easily, why not choose us? Only dozen of money and 20-35 hours' valid preparation before the test with SAP C-HRHFC-2411 exam dumps questions will make you clear exam surely.

Updated: May 28, 2022