After we develop a new version, we will promptly notify you. At 350-401 Exam Notes, you have access to the best resources in the industry. We guarantee that you absolutely don't need to spend extra money to buy other products. If you are not sure about your exam, choosing our 350-401 Exam Notes exam cram file will be a good choice for candidates. We sell products by word of mouth. You can choose one or more versions that you are most interested in, and then use your own judgment.

350-401 Exam Notes VCE dumps help you save time to clear exam.

Accompanying with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Notes exam dumps, we educate our candidates with less complicated Q&A but more essential information, which in a way makes you acquire more knowledge and enhance your self-cultivation. The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate 350-401 Dumps Cost dumps torrent which are the best for passing certification test.

We did not gain our high appraisal by our 350-401 Exam Notes exam practice for nothing and there is no question that our 350-401 Exam Notes practice materials will be your perfect choice. First, you can see the high hit rate on the website that can straightly proved our 350-401 Exam Notes study braindumps are famous all over the world. Secondly, you can free download the demos to check the quality, and you will be surprised to find we have a high pass rate as 98% to 100%.

Cisco 350-401 Exam Notes - And then, you can learn anytime, anywhere.

The Shobhadoshi product here is better, cheaper, higher quality and unlimited for all time; kiss the days of purchasing multiple Cisco braindumps repeatedly, or renewing 350-401 Exam Notes training courses because you ran out of time. Now you can learn 350-401 Exam Notes skills and theory at your own pace and anywhere you want with top of the 350-401 Exam Notes braindumps, you will find it's just like a pice a cake to pass 350-401 Exam Notesexam.

And our content of the 350-401 Exam Notes exam questions are based on real exam by whittling down superfluous knowledge without delinquent mistakes. At the same time, we always keep updating the 350-401 Exam Notes training guide to the most accurate and the latest.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.

QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

Contrary to most of the Amazon AIF-C01-KR exam preparatory material available online, Shobhadoshi’s dumps can be obtained on an affordable price yet their quality and benefits beat all similar products of our competitors. During your transitional phrase to the ultimate aim, our Insurance Licensing Ok-Life-Accident-and-Health-or-Sickness-Producer study engine as well as these updates is referential. ISTQB CTAL-TM-001 - The Questions & answers are verified and selected by professionals in the field and ensure accuracy and efficiency throughout the whole Product. Our GitHub GitHub-Advanced-Security real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. We can provide absolutely high quality guarantee for our PMI CAPM practice materials, for all of our PMI CAPM learning materials are finalized after being approved by industry experts.

Updated: May 28, 2022