Tens of thousands of our loyal customers are benefited from our 350-401 Exam Dump study materials and lead a better life now after they achieve their 350-401 Exam Dump certification. Life is full of ups and downs. We cannot predicate what will happen in the future. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment. You just need to pay the relevant money for the 350-401 Exam Dump practice materials.

CCNP Enterprise 350-401 And you can choose the favorite one.

According to the data that are proved and tested by our loyal customers, the pass rate of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dump exam questions is high as 98% to 100%. Many exam candidates are uninformed about the fact that our Latest Visual 350-401 Cert Exam preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.

To defeat other people in the more and more fierce competition, one must demonstrate his extraordinary strength. Today, getting 350-401 Exam Dump certification has become a trend, and 350-401 Exam Dump exam dump is the best weapon to help you pass certification. We all know that obtaining the 350-401 Exam Dump certification is very difficult, and students who want to pass the exam often have to spend a lot of time and energy.

Cisco 350-401 Exam Dump - What is more, we offer customer services 24/7.

Obtaining the 350-401 Exam Dump certification is not an easy task. Only a few people can pass it successfully. If you want to be one of them, please allow me to recommend the 350-401 Exam Dump learning questions from our company to you, the superb quality of 350-401 Exam Dump exam braindumps we've developed for has successfully helped thousands of candidates to realize their dreams. And our 350-401 Exam Dump study materials have helped so many customers pass the exam.

As a key to the success of your life, the benefits that 350-401 Exam Dump exam guide can bring you are not measured by money. 350-401 Exam Dump exam guide can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, 350-401 Exam Dump exam material will lead you to success.

350-401 PDF DEMO:

QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

If you want to pass your exam and get the Cisco 350-401 certification which is crucial for you successfully, I highly recommend that you should choose the Cisco 350-401 study materials from our company so that you can get a good understanding of the exam that you are going to prepare for. There are also free demos of our Nutanix NCP-CN study materials on the website that you can download before placing the orders. SAP C_FIORD_2502 - Details determine success or failure, so our every detail is strictly controlled. Huawei H28-213_V1.0 - If you believe in our products this time, you will enjoy the happiness of success all your life IAPP CIPP-US - So we have tried our best to develop the three packages for you to choose.

Updated: May 28, 2022