If you purchase 350-401 Discount Code exam questions and review it as required, you will be bound to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of 350-401 Discount Code study engine for free to experience the magic of it. Of course, if you encounter any problems during free trialing, feel free to contact us and we will help you to solve all problems on the 350-401 Discount Code practice engine. By imparting the knowledge of the 350-401 Discount Code exam to those ardent exam candidates who are eager to succeed like you, they treat it as responsibility to offer help. So please prepare to get striking progress if you can get our 350-401 Discount Code study guide with following steps for your information. The 350-401 Discount Code prep guide adopt diversified such as text, images, graphics memory method, have to distinguish the markup to learn information, through comparing different color font, as well as the entire logical framework architecture, let users on the premise of grasping the overall layout, better clues to the formation of targeted long-term memory, and through the cycle of practice, let the knowledge more deeply printed in my mind.
Under the situation of intensifying competition in all walks of life, will you choose to remain the same and never change or choose to obtain a 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Discount Code certification which can increase your competitiveness? I think most of people will choose the latter, because most of the time certificate is a kind of threshold, with 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Discount Code certification, you may have the opportunity to enter the door of an industry. And the prices of our 350-401 New Exam Cram Sheet File training engine are reasonable for even students to afford and according to the version that you want to buy. Unlike other 350-401 New Exam Cram Sheet File study materials, there is only one version and it is not easy to carry.
A good 350-401 Discount Code certification must be supported by a good 350-401 Discount Code exam practice, which will greatly improve your learning ability and effectiveness. Our study materials have the advantage of short time, high speed and high pass rate. You only take 20 to 30 hours to practice our 350-401 Discount Code guide materials and then you can take the exam.
If you buy the Software or the APP online version of our 350-401 Discount Code study materials, you will find that the timer can aid you control the time. Once it is time to submit your exercises, the system of the 350-401 Discount Code preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our 350-401 Discount Code training guide, come to choose and purchase.
Once they need to prepare an exam, our 350-401 Discount Code study materials are their first choice. As you know, it is troublesome to get the 350-401 Discount Codecertificate.
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
We sincerely hope that you can pay more attention to our Huawei H19-301_V3.0 study questions. If you buy the Microsoft DP-700 study materials from our company, you just need to spend less than 30 hours on preparing for your exam, and then you can start to take the exam. Tens of thousands of our loyal customers are benefited from our CIPS L5M5 study materials and lead a better life now after they achieve their CIPS L5M5 certification. Snowflake ARA-C01 - Everything that appears in our products has been inspected by experts. Our payment system will automatically delete your payment information once you finish paying money for our Huawei H20-711_V1.0 exam questions.
Updated: May 28, 2022
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 15, 2025
Total Q&As:335
Cisco 350-401 Examcollection Dumps Torrent
Free Download
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 15, 2025
Total Q&As:335
Cisco Latest 350-401 Practice Questions Free
Free Download
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 15, 2025
Total Q&As:335
Cisco 350-401 Latest Exam Dumps Pdf
Free Download