These training products to help you pass the exam, we guarantee to refund the full purchase cost. Our website provide all the study materials and other training materials on the site and each one enjoy one year free update facilities. If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. And we always have a very high hit rate on the 350-401 Certification Questions study guide by our customers for our high pass rate is high as 98% to 100%. No matter where you are or what you are, 350-401 Certification Questions practice questions promises to never use your information for commercial purposes. Shobhadoshi Cisco 350-401 Certification Questions exammaterials can not only help you save a lot of time.

CCNP Enterprise 350-401 Mostly choice is greater than effort.

CCNP Enterprise 350-401 Certification Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With the rapid development of the economy, the demands of society on us are getting higher and higher. The content of our 350-401 Braindumps Downloads pass guide covers the most of questions in the actual test and all you need to do is review our 350-401 Braindumps Downloads vce dumps carefully before taking the exam. Then you can pass the actual test quickly and get certification easily.

The 350-401 Certification Questions study braindumps are compiled by our frofessional experts who have been in this career fo r over ten years. Carefully written and constantly updated content of our 350-401 Certification Questions exam questions can make you keep up with the changing direction of the exam, without aimlessly learning and wasting energy. In addition, there are many other advantages of our 350-401 Certification Questions learning guide.

Cisco 350-401 Certification Questions - .

If you want to through the Cisco 350-401 Certification Questions certification exam to make a stronger position in today's competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And pass the Cisco 350-401 Certification Questions exam is not easy. Perhaps through Cisco 350-401 Certification Questions exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Shobhadoshi's Cisco 350-401 Certification Questions exam training materials. This is training product that specifically made for IT exam. With it you can pass the difficult Cisco 350-401 Certification Questions exam effortlessly.

You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Certification Questions exam.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

GIAC GRTP - God wants me to be a person who have strength, rather than a good-looking doll. ISTQB CTAL-TM-KR - We will tailor services to different individuals and help them take part in their aimed exams after only 20-30 hours practice and training. SAP C-THR97-2411 - The dumps contain all problems in the actual test. So many our customers have benefited form our SAP C_S4CPR_2502 preparation quiz, so will you! Fortinet FCSS_SASE_AD-24 - These real questions and answers can lead to some really great things.

Updated: May 28, 2022