In addition, if you decide to buy 350-401 Certification Cost exam materials from our company, we can make sure that your benefits will far exceed the costs of you. The rate of return will be very obvious for you. We sincerely reassure all people on the 350-401 Certification Cost test question from our company and enjoy the benefits that our study materials bring. With it you can secure your career. Shobhadoshi's Cisco 350-401 Certification Cost exam training materials is a good training tool. Next, through my introduction, I hope you can have a deeper understanding of our 350-401 Certification Cost learning quiz.

CCNP Enterprise 350-401 As you know, life is like the sea.

If you are willing, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Cost training PDF can give you a good beginning. Our experts made significant contribution to their excellence of the 350-401 Study Dumps study materials. So we can say bluntly that our 350-401 Study Dumps simulating exam is the best.

We provide our customers with the most reliable learning materials about 350-401 Certification Cost certification exam and the guarantee of pass. We assist you to prepare the key knowledge points of 350-401 Certification Cost actual test and obtain the up-to-dated exam answers. All 350-401 Certification Cost test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation.

Cisco 350-401 Certification Cost - what a brighter future!

You have seen Shobhadoshi's Cisco 350-401 Certification Cost exam training materials, it is time to make a choice. You can choose other products, but you have to know that Shobhadoshi can bring you infinite interests. Only Shobhadoshi can guarantee you 100% success. Shobhadoshi allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.

Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns. Our 350-401 Certification Cost prep guide can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.

Cisco 200-301-KR - Shobhadoshi is a professional website that providing IT certification training materials. For we have three different versions of our PMI PMI-RMP study guide, and you will have different feelings if you have a try on them. UiPath UiPath-TAEPv1 - Because it will make you pass the exam easily, since then rise higher and higher on your career path. At present, our Google Chrome-Enterprise-Administratorstudy materials can give you a ray of hope. Adobe AD0-E907 - Moreover, we can give you a year of free updates until you pass the exam.

Updated: May 28, 2022