Before you try to attend the 350-401 Brain Dumps practice exam, you need to look for best learning materials to easily understand the key points of 350-401 Brain Dumps exam prep. There are 350-401 Brain Dumps real questions available for our candidates with accurate answers and detailed explanations. We are ready to show you the most reliable 350-401 Brain Dumps pdf vce and the current exam information for your preparation of the test. By the way, the 350-401 Brain Dumpscertificate is of great importance for your future and education. Our 350-401 Brain Dumps practice materials cover all the following topics for your reference. Our 350-401 Brain Dumps exam dumps are required because people want to get succeed in IT field by clearing the certification exam.

CCNP Enterprise 350-401 Our after sales services are also considerate.

With 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Brain Dumps exam guide, you can perform the same computer operations as the real exam, completely taking you into the state of the actual exam, which will help you to predict the problems that may occur during the exam, and let you familiarize yourself with the exam operation in advance and avoid rushing during exams. To those time-sensitive exam candidates, our high-efficient 350-401 Latest Cram Materials study questions comprised of important news will be best help. To go with the changing neighborhood, we need to improve our efficiency of solving problems as well as the new contents of our 350-401 Latest Cram Materials exam questions accordingly, so all points are highly fresh about in compliance with the syllabus of the exam.

For we have engaged in this career for years and we are always trying our best to develope every detail of our 350-401 Brain Dumps study quiz. With our 350-401 Brain Dumps exam questions, you will find the exam is just a piece of cake. What are you still hesitating for? Hurry to buy our 350-401 Brain Dumps learning engine now!

Cisco 350-401 Brain Dumps - No company in the field can surpass us.

Our 350-401 Brain Dumps exam questions just focus on what is important and help you achieve your goal. With high-quality 350-401 Brain Dumps guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. In your every stage of review, our 350-401 Brain Dumps practice prep will make you satisfied.

Because, after all, 350-401 Brain Dumps is a very important certified exam of Cisco. But 350-401 Brain Dumps exam is not so simple.

350-401 PDF DEMO:

QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

All time and energy you devoted to the Amazon SCS-C02 preparation quiz is worthwhile. In order to pass Cisco certification Databricks Databricks-Certified-Data-Engineer-Associate exam disposably, you must have a good preparation and a complete knowledge structure. Cloudera CDP-3002 - Many people, especially the in-service staff, are busy in their jobs, learning, family lives and other important things and have little time and energy to learn and prepare the exam. Cisco certification Scaled Agile SAFe-ASE exam is a very good test to prove your ability. ACAMS CAMS-CN - For a better understanding of their features, please follow our website and try on them.

Updated: May 28, 2022