With our 350-401 Authorized Certification learning questions, you can enjoy a lot of advantages over the other exam providers’. The most attraction aspect is that our high pass rate of our 350-401 Authorized Certification study materials as 98% to 100%. I believe every candidate wants to buy 350-401 Authorized Certification learning bbraindumps that with a high pass rate, because the data show at least two parts of the 350-401 Authorized Certification exam guide, the quality and the validity which are the pass guarantee to our candidates. If you really want to pass the 350-401 Authorized Certification exam, you should choose our first-class 350-401 Authorized Certification study materials. And you cannot miss the opportunities this time for as the most important and indispensable practice materials in this line, we have confidence in the quality of our 350-401 Authorized Certification practice materials, and offer all after-sales services for your consideration and acceptance. Join us and you will be one of them.

CCNP Enterprise 350-401 It is quite convenient.

CCNP Enterprise 350-401 Authorized Certification - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Our study materials come to your help. If you are better, you will have a more relaxed life. 350-401 Reliable Vce Exam Simulator guide materials allow you to increase the efficiency of your work.

our 350-401 Authorized Certification study materials will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our 350-401 Authorized Certification study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our 350-401 Authorized Certification study materials better.

Our Cisco 350-401 Authorized Certification actual test guide can give you some help.

Before you decide to buy Shobhadoshi of Cisco 350-401 Authorized Certification exam questions, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Shobhadoshi of Cisco 350-401 Authorized Certification exam training materials. The Cisco 350-401 Authorized Certification exam of Shobhadoshi is the best choice for you.

The future is really beautiful, but now, taking a crucial step is even more important! Buy 350-401 Authorized Certification exam prep and stick with it.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

Salesforce PDI - And the materials we have are very cheap. GIAC GSOM - Anyway, after your payment, you can enjoy the one-year free update service with our guarantee. CheckPoint 156-587 - It includes questions and answers, and issimilar with the real exam questions. Besides, the price of our Huawei H20-813_V1.0 learning guide is very favourable even the students can afford it. Shobhadoshi Cisco Microsoft SC-100-KR exam training materials will be the first step of your achievements.

Updated: May 28, 2022