In recent, Shobhadoshi began to provide you with the latest exam dumps about IT certification test, such as Cisco 350-401 Actual Questions certification dumps are developed based on the latest IT certification exam. Shobhadoshi Cisco 350-401 Actual Questions certification training dumps will tell you the latest news about the exam. The changes of the exam outline and those new questions that may appear are included in our dumps. So you needn’t to read and memorize the boring reference books of the 350-401 Actual Questions exam. Most people have successfully passed the exam under the assistance of our study materials. Only if you choose to use exam dumps Shobhadoshi provides, you can absolutely pass your exam successfully.

CCNP Enterprise 350-401 Stop hesitating.

Research indicates that the success of our highly-praised 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Actual Questions test questions owes to our endless efforts for the easily operated practice system. The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate 350-401 Latest Visual Cert Exam dumps torrent which are the best for passing certification test.

We did not gain our high appraisal by our 350-401 Actual Questions exam practice for nothing and there is no question that our 350-401 Actual Questions practice materials will be your perfect choice. First, you can see the high hit rate on the website that can straightly proved our 350-401 Actual Questions study braindumps are famous all over the world. Secondly, you can free download the demos to check the quality, and you will be surprised to find we have a high pass rate as 98% to 100%.

Cisco 350-401 Actual Questions - We look forward to meeting you.

Get the latest 350-401 Actual Questions actual exam questions for 350-401 Actual Questions Exam. You can practice the questions on practice software in simulated real 350-401 Actual Questions exam scenario or you can use simple PDF format to go through all the real 350-401 Actual Questions exam questions. Our products are better than all the cheap 350-401 Actual Questions Exam braindumps you can find elsewhere, try free demo. You can pass your actual 350-401 Actual Questions Exam in first attempt. Our 350-401 Actual Questions exam material is good to pass the exam within a week. Shobhadoshi is considered as the top preparation material seller for 350-401 Actual Questions exam dumps, and inevitable to carry you the finest knowledge on 350-401 Actual Questions exam certification syllabus contents.

The 350-401 Actual Questions exam materials is a dump, maybe many candidates will worry about how to payment and whether it is safe when pay for it. Some people may think that online shopping is not safe.

350-401 PDF DEMO:

QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

Up to now, we have more than tens of thousands of customers around the world supporting our Amazon AWS-Solutions-Architect-Associate-KR exam questions. We believe that the unique questions and answers of our EMC NCP-MCI exam materials will certainly impress you. Your time will be largely saved for our workers know about our Cloud Security Alliance CCSK practice materials better. That is why our NAHQ CPHQ exam questions are popular among candidates. There are so many advantages of our Oracle 1Z1-922 actual exam, and you are welcome to have a try!

Updated: May 28, 2022