First of all, we have the best and most first-class operating system, in addition, we also solemnly assure users that users can receive the information from the 100-105 Study Guide certification guide within 5-10 minutes after their payment. Second, once we have written the latest version of the 100-105 Study Guidecertification guide, our products will send them the latest version of the 100-105 Study Guide test practice question free of charge for one year after the user buys the product. Last but not least, our perfect customer service staff will provide users with the highest quality and satisfaction in the hours. As the feefbacks from our worthy customers praised that our 100-105 Study Guide exam braindumps are having a good quality that the content of our 100-105 Study Guide learning quiz is easy to be understood. About some esoteric points, our experts illustrate with examples for you. Choose the 100-105 Study Guide test guide absolutely excellent quality and reasonable price, because the more times the user buys the 100-105 Study Guide test guide, the more discounts he gets.

ICND1 100-105 So, buy our products immediately!

ICND1 100-105 Study Guide - Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) And we will send you the new updates if our experts make them freely. It is important to predicate the tendency of the New 100-105 Test Sample Online study materials if you want to easily pass the exam. Now, all complicate tasks have been done by our experts.

Shobhadoshi follows the career ethic of providing the first-class 100-105 Study Guide practice questions for you. Because we endorse customers’ opinions and drive of passing the 100-105 Study Guide certificate, so we are willing to offer help with full-strength. With years of experience dealing with 100-105 Study Guide learning engine, we have thorough grasp of knowledge which appears clearly in our 100-105 Study Guide study quiz with all the keypoints and the latest questions and answers.

Cisco 100-105 Study Guide - They believe and rely on us.

We have handled professional 100-105 Study Guide practice materials for over ten years. Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. Their abilities are unquestionable, besides, 100-105 Study Guide exam questions are priced reasonably with three kinds: the PDF, Software and APP online. Though the content is the same, but their displays are totally different and functionable.

We can help you pass the Cisco 100-105 Study Guide exam smoothly. In order not to let success pass you by, do it quickly.

100-105 PDF DEMO:

QUESTION NO: 1
Which dynamic routing protocol uses only the hop count to determine the best path to a destination?
A. EIGRP
B. OSPF
C. IGRP
D. RIP
Answer: D
Explanation:
Determining the best path involves the evaluation of multiple paths to the same destination network and selecting the optimum or shortest path to reach that network. Whenever multiple paths to the same network exist, each path uses a different exit interface on the router to reach that network.
The best path is selected by a routing protocol based on the value or metric it uses to determine the distance to reach a network. A metric is the quantitative value used to measure the distance to a given network. The best path to a network is the path with the lowest metric.
Dynamic routing protocols typically use their own rules and metrics to build and update routing tables. The routing algorithm generates a value, or a metric, for each path through the network.
Metrics can be based on either a single characteristic or several characteristics of a path. Some routing protocols can base route selection on multiple metrics, combining them into a single metric.
The following lists some dynamic protocols and the metrics they use:
Routing Information Protocol (RIP): Hop count
Open Shortest Path First (OSPF): Cisco routers use a cost based on cumulative bandwidth from source to destination Enhanced Interior Gateway Routing Protocol (EIGRP): Bandwidth, delay, load, reliability

QUESTION NO: 2
In which two circumstances are private IPv4 addresses appropriate? (Choose two)
A. on hosts that require minimal access to external resources
B. on internal hosts that stream data solely to external resources
C. on the public-facing interface of a firewall
D. on hosts that communicates only with other internal hosts
E. to allow hosts inside an enterprise to communicate in both directions with hosts outside the enterprise
Answer: A,D

QUESTION NO: 3
Which network configuration allows a switch to send traffic from multiple VLANs over a single link to a router that routes between the VLANs?
A. virtual trunking
B. spanning-tree
C. port channel
D. router-on-a-stick
Answer: D

QUESTION NO: 4
Refer to the exhibit. A network technician is unable to ping from R1 to R2.
What will help correct the problem?
A. Ensure that the serial cable is correctly plugged in to the interfaces.
B. Change the subnet masks of both interfaces to 255.255.255.240.
C. Apply the clock rate 56000 configuration command to the serial0/1 interface of R1.
D. Change the address of the serial0/1 interface of R1 to 192.1.1.4.
E. Configure the serial0/1 interfaces on R1 and R2 with the no shutdown command.
Answer: A

QUESTION NO: 5
How does a switch differ from a hub?
A. A switch operates at a lower, more efficient layer of the OSI model.
B. A switch decreases the number of broadcast domains.
C. A switch does not induce any latency into the frame transfer time.
D. A switch decreases the number of collision domains.
E. A switch tracks MAC addresses of directly-connected devices.
Answer: E
Explanation:
Some of the features and functions of a switch include:
A switch is essentially a fast, multi-port bridge, which can contain dozens of ports. Rather than creating two collision domains, each port creates its own collision domain. In a network of twenty nodes, twenty collision domains exist if each node is plugged into its own switch port. If an uplink port is included, one switch creates twenty-one single-node collision domains. A switch dynamically builds and maintains a Content-Addressable Memory (CAM) table, holding all of the necessary MAC information for each port. For a detailed description of how switches operate, and their key differences to hubs, see the reference link below.
http://www.cisco.com/warp/public/473/lan-switch-cisco.shtml

And we can always give you the most professional services on our Microsoft GH-200 training guide. Huawei H19-633_V2.0 - So that you will have the confidence to win the exam. Cloudera CDP-3002 - We have tried our best to find all reference books. Getting Cisco 300-220 certificate, you will get great benefits. HP HPE2-B07 - If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it.

Updated: May 28, 2022