My dream is to become a top IT expert. I think that for me is nowhere in sight. But to succeed you can have a shortcut, as long as you make the right choice. They are willing to solve the problems of our 350-401 Quality training guide 24/7 all the time. If you have any question that you don't understand, just contat us and we will give you the most professional advice immediately. When you get the certification of Cisco 350-401 Quality exam, the glorious period of your career will start.

CCNP Enterprise 350-401 We will provide you with thoughtful service.

Before you try to attend the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Quality practice exam, you need to look for best learning materials to easily understand the key points of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Quality exam prep. By the way, the 350-401 Reliable Exam Objectives Pdfcertificate is of great importance for your future and education. Our 350-401 Reliable Exam Objectives Pdf practice materials cover all the following topics for your reference.

Our 350-401 Quality exam dumps are required because people want to get succeed in IT field by clearing the certification exam. Passing 350-401 Quality practice exam is not so easy and need to spend much time to prepare the training materials, that's the reason that so many people need professional advice for 350-401 Quality exam prep. The 350-401 Quality dumps pdf are the best guide for them passing test.

You final purpose is to get the Cisco 350-401 Quality certificate.

For a long time, high quality is our 350-401 Quality exam questions constantly attract students to participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, and at the same time the 350-401 Quality practice quiz brings more outstanding teaching effect. Our high-quality 350-401 Quality} learning guide help the students know how to choose suitable for their own learning method, our 350-401 Quality study materials are a very good option.

More importantly, it is evident to all that the 350-401 Quality training materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 350-401 Quality exam and get the related certification in the shortest time, choosing the 350-401 Quality training materials from our company will be in the best interests of all people.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

All the preparation material reflects latest updates in The Open Group OGEA-101 certification exam pattern. IAPP CIPP-US - As is known to us, where there is a will, there is a way. ISACA CISM-CN - This innovative facility provides you a number of practice questions and answers and highlights the weak points in your learning. Huawei H13-321_V2.0 - At the same time, you will have more income to lead a better life and develop your life quality. VMware 6V0-22.25 - Our behavior has been strictly ethical and responsible to you, which is trust worthy.

Updated: May 28, 2022