On one hand, our 350-401 Materials test material owns the best quality. When it comes to the study materials selling in the market, qualities are patchy. But our 350-401 Materials test material has been recognized by multitude of customers, which possess of the top-class quality, can help you pass exam successfully. They are the versions: PDF, Software and APP online. The PDF version of our 350-401 Materials exam simulation can be printed out, suitable for you who like to take notes, your unique notes may make you more profound. We treat your time as our own time, as precious as you see, so we never waste a minute or two in some useless process.

CCNP Enterprise 350-401 Our experts have taken your worries seriously.

The content system of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Materials exam simulation is constructed by experts. You can download the electronic invoice of the 350-401 Test Guide Online study materials and reserve it. Once you have decided to purchase our 350-401 Test Guide Online study materials, you can add it to your cart.

Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of 350-401 Materials training questions, you will agree with what I said. What our 350-401 Materials study materials contain are all the real questions and answers that will come out in the real exam. As long as you study with our 350-401 Materials exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure.

Cisco 350-401 Materials - Many people think this is incredible.

We have chosen a large number of professionals to make 350-401 Materials learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from 350-401 Materials exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our 350-401 Materials test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose 350-401 Materials test guide to get you closer to success.

The comprehensive coverage would be beneficial for you to pass the exam. Only need to spend about 20-30 hours practicing our 350-401 Materials study files can you be fully prepared for the exam.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

But our Microsoft SC-401 exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. There are many benefits after you pass the Appian ACD301 certification such as you can enter in the big company and double your wage. Salesforce CPQ-301 - Time is so important to everyone because we have to use our limited time to do many things. And you will find that it is easy to understand the content of the SAP C-S4TM-2023 learning guide for our experts have simplified the questions and answers. Microsoft AZ-204 - No matter what your previous learning level is, there will be no problem of understanding.

Updated: May 28, 2022