And our expert team updates the 350-401 Dumps study guide frequently to let the clients practice more. So the quality of our 350-401 Dumps practice materials is very high and we can guarantee to you that you will have few difficulties to pass the exam. To let the clients be familiar with the atmosphere and pace of the real 350-401 Dumps exam we provide the function of stimulating the exam. We have installed the most advanced operation system in our company which can assure you the fastest delivery speed on our 350-401 Dumps learning guide, you can get immediately our 350-401 Dumps training materials only within five to ten minutes after purchase after payment. At the same time, there is really no need for you to worry about your personal information if you choose to buy the 350-401 Dumps exam practice from our company. Of course you can freely change another 350-401 Dumps exam guide to prepare for the next exam.
CCNP Enterprise 350-401 Dumps - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Action always speaks louder than words. If you are satisfied with our 350-401 Examcollection Dumps training guide, come to choose and purchase. If you buy the Software or the APP online version of our 350-401 Examcollection Dumps study materials, you will find that the timer can aid you control the time.
Now, you are fortunate enough to come across our 350-401 Dumps exam guide. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well. Our 350-401 Dumps exam materials are famous among candidates.
According to personal propensity and various understanding level of exam candidates, we have three versions of 350-401 Dumps study guide for your reference. They are the versions of the PDF, Software and APP online. If you visit our website on our 350-401 Dumps exam braindumps, then you may find that there are the respective features and detailed disparities of our 350-401 Dumps simulating questions. And you can free donwload the demos to have a look.
With the rapid development of society, people pay more and more attention to knowledge and skills. So every year a large number of people take 350-401 Dumps tests to prove their abilities.
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
SAP C_HRHFC_2411 - Holding a professional certificate means you have paid more time and effort than your colleagues or messmates in your major, and have experienced more tests before succeed. Amazon AWS-Solutions-Architect-Associate - Although everyone hopes to pass the exam, the difficulties in preparing for it should not be overlooked. We want to finish long term objectives through customer satisfaction and we have achieved it already by our excellent Microsoft SC-100-KR exam questions. Obtaining the Amazon DVA-C02 certification is not an easy task. Amazon CLF-C02 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions provide free trial service for consumers.
Updated: May 28, 2022
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 13, 2025
Total Q&As:335
Cisco Study 350-401 Test
Free Download
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 13, 2025
Total Q&As:335
Cisco New 350-401 Practice Test Online
Free Download
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Updated: June 13, 2025
Total Q&As:335
Cisco Exam 350-401 Outline
Free Download